Furuno GPS NAVIGATOR GP-150 - Manual (Page 100)

FURUNO
GP-150/Dual
SP-2 E4440S01C-M
3 INTERFACE
3.1 Number of ports 4
3.1.1 Data format IEC61162-1 (JUL-2000), NMEA0183 Ver1.5/2.0
3.1.2 IN: DATA 1 and 2*: AGFPA, DBT, DPT, MTW, TLL
HDG**, HDM**, HDT**, VBW**, VHW**
DATA 3: MOB from external device (contact closure),
DATA 4: DGPS correction data in RTCM SC-104 V2.0,
Waypoint data downloaded from YEOMAN plotter,
Waypoint data or navaids information from conventional PC
OUT: AAM, APA, APB, BOD, BWC, BWR, BWW, DTM, GBS, GGA, GLL,
GNS, RMB, RMC, Rnn, RTE, VTG, WCV, WNC, WNR, WPL, XTE,
ZDA (or LOGOUT depending on jumper setting for Port 3),
Waypoint data to conventional PC (Data 4 only)
*GP-150-Dual: DATA 2 port is used for the system connection.
**: GP-150 only
4 POWER SUPPLY
4.1 Display unit 12-24 VDC: 0.8-0.4 A (w/ internal beacon receiver)
4.2 Rectifier (PR-62, option) 100/110-115/220/230 VAC, 1 phase, 50/60Hz
5 ENVIRONMENTAL CONDITION
5.1 Ambient temperature
Antenna unit -25ﾟC to 70ﾟC
Display unit -15ﾟC to 55ﾟC
5.2 Relative humidity 95 % at +40ﾟC
5.3 Degree of protection
Antenna unit IPX6
Display unit IPX5 (USCG CFR-46)
5.4 Vibration -2 - 5 Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
(7 m/s² maximum acceleration at 13.2 Hz)
-13.2 - 100 Hz with a constant maximum acceleration of 7 m/s²
6 COATING COLOR
6.1 Antenna unit N9.5 (white)
6.2 Display unit N3.0