Yamaha NS-PA120 - Manual (Page 6)

5
En
Caution: Make sure the power cables for your AV components are disconnected from the AC wall outlets before
making any connections.
Connection diagram
■ Preparing the speaker cables
Once you have positioned the speakers, cut the 24.5-
meter (80 ft.) speaker cable into five cables for
connecting the front right/left speakers, center speaker
and surround right/left speakers.
1
Cut the supplied speaker cable to suitable
length for each speaker.
2
Remove about 15 mm (5/8") of insulation from
the end of each speaker cable.
3
Twist the bare wires tightly so the individual
strands are not splayed.
Notes
• Make the speaker cables as short as possible. Do not
bundle or roll up excess cable.
• Be careful not to injure yourself while preparing the
speaker cables.
Connecting the speakers
ANTENNA FM GND AM
COMPONENT VIDEO
PR
PB
Y
OPTICAL ( TV )
AV 1 AV 2 AV 3 AV 4 AV 5 AUDIO 1 AUDIO 2
COAXIAL (CD) COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI 1 (BD/DVD) HDMI 2 HDMI 3 HDMI 4
FRONT
COMPONENT VIDEO
MONITOR OUT
PR
PB
Y
HDMI OUT
MONITOR OUT
AV OUT SUBWOOFER AUDIO OUT
SPEAKERS
CENTER SURROUND
FRONT
SPEAKERS
Center speaker
Front speaker
Right Left
Note: The exact layout of the
speaker terminals depends
on your amplifier.
Surround speakers
Right Left
Front speaker
Amplifier
Good No Good
15 mm (5/8")