Setup of the internal clock, Press the setup key while in the stop mode, Press the execute/yes key – Fostex D824 User Manual
Page 12: Flashing
12
D824/D1624 Quick Operation Guide
This recorder contains an internal clock function.
Upon finishing format of the current drive, set internal clock to the present time by procedure
explained below. Procedures below is explained on the assumption that current drive has been
formatted, the program head (ABS 0) is displayed and this recorder is on standby.
<Note>
Be sure the internal clock is setup to the correct year, month, day and present time.
The year, month, day and time are important data necessary for executing the "Multiple Undo Function"
explained in the Reference Manual. For details on multiple undo function, refer to the Reference Manual.
Setup of the Internal Clock
1. Press the SETUP key while in the stop
mode.
The recorder will enter the SETUP mode and [Sig-
nature Set?] menu will be displayed.
2. Rotate JOG dial to display the [Date & Time
Set?] (? blinks) menu and press the
EXECUTE/YES key.
The recorder will change to display of hour, minute,
second, day and month in real time setup at ship-
ping the recorder from the plant (Example is De-
cember 8, 14 hour, 48 minutes, 15 seconds).
3. Press the EXECUTE/YES key.
Hour, minute, second, day and month at the
instant key is pressed will be held and these can
be edited (Hour display will flash).
4. Move edit point with the SHUTTLE dial and
input the number with the JOG dial.
The following numbers can be input at each edit
point.
Hour
:00 ~ 23
Minute
:00 ~ 59
Day
:01 ~ 31
Month
:January ~ December
Year
:00 ~ 99
<Note>
The "second" figures will start from 00 at the instant the
following is executed (Pressing the EXECUTE/YES key).
Press the EXECUTE/YES key in reference to the time
announcement.
5. Press the EXECUTE/YES key.
The recorder will be set to the time/month, day
that was input and continue to function as the
internal clock.
6. Exit from the SETUP mode by pressing the
EXIT/NO key or STOP button twice.
The recorder will change to the time base display prior
to entering the SETUP mode.
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
SURE?
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
Flashing