Int auto word video, Setting the reference clock, About reference clock setting – Fostex D824 User Manual
Page 20: Now the digital out is set to "adat, Spdif :async spdif :sync adat :async adat :sync, D. in ?] setting [clock sel ?] setting
20
D824/D1624 Quick Operation Guide
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
5. Select [D.out adat] by using the JOG dial, and
press the EXECUTE/YES key.
Now the Digital Out is set to "adat".
Setting the reference clock
6. Select the [Clock Sel?] menu via using the JOG
dial, and press the EXECUTE/YES key.
The current reference clock is displayed together with
"Clock Sel?". The default is [Clock Sel? Int].
Press the EXECUTE/YES key, and the current selection will
start flashing.
When setting "Digital In" (see the previous page) to
an "Async" mode ("adat:Async" or "SPDIF:Async"), you
must select whether the recorder is referenced to the
internal clock or word clock from an external digital
device. When setting "Digital In" to a "Sync" mode
("adat:Sync" or "SPDIF:Sync"), the recorder is refer-
enced to the word clock received through the exter-
nal digital audio signal.
<About reference clock setting>
You must set the reference clock when setting "Digital
In" (see the previous page) to an "Async" mode
("adat:Async" or "SPDIF:Async"). You can select from
[Auto], [Word] and [Video] in addition to the default [Int].
Note that [Video] is available only when the optional TC/
SYNC card (model 8345) is installed.
See the table below about the relation between the Digi-
tal In setting and reference clock.
7. Select the desired reference clock by using the
JOG dial, and press the EXECUTE/YES key.
The reference clock is now set to your desired clock.
When connecting the recorder to a digital mixing console
that can accept the word clock from the WORD OUT of the
recorder, set the recorder's reference clock to [Int].
See the table below in other cases.
8. Press the EXIT/NO key or STOP button to exit
the SETUP mode.
The display shows the beginning of the disk with ABS
time base.
After complete [Digital In], [Digital Out] and [Refer-
ence Clock] settings, execute the basic recording in a
similar manner to "Basic analog recording" described
earlier.
Flashing
Flashing
SPDIF :Async
SPDIF :Sync
adat :Async
adat :Sync
[D. in ?] setting
[Clock Sel ?]
setting
Int
Auto
Word
Video
clock received
from WORD IN
Available only when
installing the op-
tional Model 8345
TC/SYNC card. If
you try to select
“Video,” [Void w/o
Video] is displayed
and you cannot se-
lect it. See the ap-
pendix of the Refer-
ence manual for de-
tails.
Regardless of receiving or not re-
ceiving word clock from WORD IN,
the recorder is referenced to the
internal clock. When the recorder
receives correct digital signals, the
[DIGITAL] indicator lights in the
display.
When receiving word clock from
WORD IN, the recorder automati-
cally synchronizes to the incom-
ing clock, while the [DIGITAL] and
[EXT SYNC] indicators light in the
display.
When receiving word clock from
WORD IN, the recorder synchro-
nizes to the incoming clock, while
the [DIGITAL] and [EXT SYNC] in-
dicators light in the display.
Regardless of receiving or not receiving word clock from WORD IN, the recorder synchronizes to the
external S/P DIF digital signal. When the recorder receives correct digital signals, the [DIGITAL] and
[EXT SYNC] indicators light in the display. When Digital In is set to a SYNC mode, if you try to select
[Clock Sel?] menu, The display will show [Clock Sel D.in!] (indicating that the clock is set to Digital In!)
and the recorder ignores your operation.
Regardless of receiving or not receiving word clock from WORD IN, the recorder synchronizes to
the external adat digital signals. When the recorder receives correct digital signals, the [DIGITAL]
and [EXT SYNC] indicators light in the display. When Digital In is set to a SYNC mode, if you try to
select [Clock Sel?] menu, The display will show [Clock Sel D.in!] (indicating that the clock is set to
Digital In!) and the recorder ignores your operation.
Regardless of receiving or not re-
ceiving word clock from WORD
IN, the recorder is referenced to
the internal clock. When the re-
corder receives correct digital sig-
nals, the [DIGITAL] indicator lights
in the display.
When receiving word clock from
WORD IN, the recorder automati-
cally synchronizes to the incom-
ing clock, while the [DIGITAL] and
[EXT SYNC] indicators light in the
display.
When receiving word clock from
WORD IN, the recorder synchro-
nizes to the incoming clock, while
the [DIGITAL] and [EXT SYNC] in-
dicators light in the display.
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
no clock
received from
WORD IN
no clock
received from
WORD IN
no clock
received from
WORD IN
no clock
received from
WORD IN
clock received
from WORD IN
clock received
from WORD IN
clock received
from WORD IN
When no word clock is received,
the recorder is referenced to the
internal clock, while the [EXT
SYNC] indicator flashes.
When no word clock is received, the
[EXT SYNC] indicator flashes
showing that the recorder cannot be
locked.
When no word clock is received,
the recorder is referenced to the
internal clock, while the [EXT
SYNC] indicator flashes.
When no word clock is received, the
[EXT SYNC] indicator flashes show-
ing that the recorder cannot be
locked.