Fluke 2625A User Manual

Page 22

Advertising
background image

2620A, 2625A

Users Manual

1-4

Table 1-1. Hydra Features

•

Channel

Scanning

Can be continuous scanning, scanning at an interval time, single scans, or triggered (internal or
external) scans.

•

Channel

Monitoring

Make measurements on a single channel and view these measurements on the display.

•

Channel Scanning and Monitoring
View measurements made for the monitor channel while scanning of all active channels continues.

•

Multi-Function Display
Left (numeric) display shows measurement readings; also used when setting numeric parameters.

Right (alphanumeric) display used for numeric entries, channel number selection and display, status
information, and operator prompts.

•

Front-Panel

Operation

Almost all operations can be readily controlled with the buttons on the front panel.

•

Measurement Input Function and Range
Volts dc (VDC), volts ac (VAC), frequency (Hz), and resistance (

Ω

) inputs can be specified in a fixed

measurement range. Autoranging, which allows the instrument to use the measurement range
providing the optimum resolution, can also be selected.

•

Temperature Measurement
Thermocouple types J, K, E, T, N, R, S, and B, and Hoskins Engineering Co. type C are supported.
Also, DIN/IEC 751 Platinum RTDs are supported.

•

Totalize Events on the Totalizing Input

•

Alarm Limits and Digital Output Alarm Indication

•

4-Terminal Resistance Measurements (Channels 1 through 10 only)

•

RS-232 Computer Interface Operation

•

Measurement Rate Selection

•

Nonvolatile

Memory

Storage of minimum, maximum, and most recent measurements for all scanned channels.

Storage of Computer Interface setup, channel configurations, and calibration values.

Storage of measurement data: storage for 2047 scans of up to 21 channels, representing up to
42,987 readings (Hydra Data Logger only).

Advertising
This manual is related to the following products: