Faria Instruments GW0016 - Manual (Page 8)

When the “Fuel Remaining” reaches this
amount, the “Low Fuel” alarm will sound and
a warning LED will flash in the display.
The display will automatically go into “set”
mode to allow the operator to reset the alarm
value to a lower value to turn off the alarm if
desired. If the option is set to zero, the “Low
Fuel” alarm will be disabled.
Pressing the “Mode” button for more than
one second while in the REM display will
access the option available for this function.
a) Set the amount of fuel remaining when
the alarm will go off. The display shows
“A+-XXX.X.”
Holding the “Up” button will increase the
amount
and holding the “Down” button will decrease
the amount.
Voltmeter
Displays the System Voltage. There are no
adjustments available.
M
M
Tachometer Display Sequence
Quick
Press
Quick
Press
Hourmeter
M
M
M
M
Quick
Press
Inst. Fuel
Consumption
US GAL
M CLR TRP
M ADJ TRP
M ALARM
IMP GAL
Liters
M
Quick
Press
Trip Fuel Consumed
M
Quick
Press
Fuel Remaining
Voltmeter
Figure 1
Page 7