Fisher LO540 - Manual (Page 4)

4
Assembly
• Insert the ends of the seat back tube (inside the pad) into the
sockets in the front rail. Push down on the seat back tube until
you hear a
“click” on each side.
• Pull up on the seat back tube to be sure it is secure.
5
Pad
Seat Back Tube
Socket
Socket
• Locate the pocket in the bottom of the pad.
• Fit the hardboard (attached to the front bar) into the pocket in
the pad.
6
Pocket
Hardboard
• Fit the clips on the front edge of the pad to the bottom edge of the
front bar.
7
Clips
• Wrap a pad flap around a front rail and fasten the buckle. Make sure
you hear a “click”.
• Repeat this procedure to fasten the other pad flap.
8
Pad Flap
Buckle