Assembly – Fisher-Price BO639 User Manual

Page 4

Advertising
background image

SHOWN ACTUAL SIZE

Assembly

4

Lower Leg

• Position a lower leg so that it stands on a flat surface, as shown.
• Fit a foot onto the end of the lower leg.
• Insert a #8 x

1

/

2

" screw through the bottom of the foot

and into the lower leg. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.

• Repeat this procedure to assemble the other foot to the

other lower leg.

IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.

Foot

• Position an upper leg so that the red dot is upward.
• While pressing the button on the straight end of an upper

leg, insert the upper leg into a lower leg. Make sure the but-
ton on the upper leg “snaps” into the hole in the lower leg.

• Repeat this procedure to assemble the other upper leg to the

other lower leg.

#8 x

1

/

2

" Screw - 2

1

Red Dot

Lower Leg

Upper Leg

Straight

End

Button

Hole

2

• Locate the R and L on the underside of each elbow foot. The

R indicates the right leg. The L indicates the left leg.

• While pressing the upper button on the right leg, fit it into

the tube in the motorized frame. Make sure the upper button
on the right leg “snaps” into the hole in the tube.

• Repeat this procedure to assemble the left leg to the

motorized frame.

• When the legs are assembled correctly to the tubes in the

motorized frame, you should not see the red dots.

Tube

Hole

Red Dot

Motorized Frame

Button

Elbow Foot

L

R

3

• Stand the assembly upright.
• Pull the legs out so that the buttons “snap” into the holes in

the motorized frame.

• When standing behind the product, all four feet should be

flat upon the floor. And, check for an L marking on the left
foot and an R marking on the right foot.

• If the feet are not flat upon the floor, or the left and right feet

have been reversed, remove both lower legs from the upper
legs. Replace them onto the opposite upper leg.

Feet

Feet

Button

Button

L

R

4

Advertising