Fisher-Price BO639 - Manual (Page 7)

Assembly
7
• Insert a M4 x 31.5 mm bolt
through smaller hole in the
motorized frame tube and into
the seat tube.
• Attach an M4 lock nut to the bolt. Make sure the rounded
side of the lock nut faces out.
• Using an adjustable wrench, hold the lock nut in place.
Then, using a Phillips Screwdriver, tighten the bolt. Do not
over-tighten.
M4 x 31.5 mm Bolt
Shown Actual Size
M4 Lock Nut
Rounded
Side
• Fit the string (below the knot) of a toy
through the slot in a clip on the mobile.
• Pull down on the toy to be sure it is secure on the mobile.
• Repeat this procedure to assemble the other three toys to
the mobile.
Note: Toys may be different than those shown.
Clip
Slot
Clip
Mobile
Toy
Toy
14
13