Fujioh ECW-360 - Manual (Page 8)

8
replacing the light bulb
Two 50W halogen light bulbs can be installed in this range hood.
Prior to replacing the light bulb, purchase a halogen light bulb (PAR20 bulb, in the base
diameter 26mm: medium base), rated 120V - 50W or below.
1 To remove the light bulb, turn it counter-clockwise. Then, replace the light bulb with a
new one.
NOTE: When replacing the bulb, wait until it has cooled off before removing, or you may
burn your hand.
To remove the light bulb To install the light bulb
re-assembling
1 Filter
Place the filter in the groove, hold it
upward and turn the knob clockwise
to fix it securely.
2 Rectifier Baffle Panel
With holding the rectifier baffle
panel by both hands, place it on the
catches. Push the panel upward and
slide it to engage the keyholes with
2 screws, then tighten the screws to
fix the panel firmly.
NOTE: Make sure that the rectifier
baffle panel and filters are fixed
in the appropriate positions
correctly.
Knob
Filter