Fujitsu Siemens Computers Bump Case FPCCC24 - Manual (Page 4)

4
case. Note that the flap on the left side also opens for port
access, but restraining straps prevent the system from being
inserted or removed from that side.
Slide the system into the bump case, with the screen facing
the open window. (See Figure 3). Reattach the flap to the
side of the case.
Figure 3. Inserting Tablet PC into Bump Case
The ends of the elasticized handstraps have D-rings to which
you can attach the shoulder strap. To secure the shoulder
strap, attach the strap clips to two of the D-rings. The bump
case can be carried vertically, horizontally, or diagonally,
depending on how you orient the clips.
You can also use one of the D-rings to attach a pen tether.
Bump case
(rear, with side flap open) Tablet PC
FPC58-0721-03.fm Page 4 Thursday, January 22, 2004 2:01 PM