Fluke 572 - Manual (Page 16)

16
572
Graphic Display and DIP Settings
D
3
Backlight: Backlight ON or OFF.
Set Default: Activates the factory defaults.
Setup: Setup HiAlarm and Emissivity adjustment
activated.
Laserflash: The laser flashes when the alarm values
are surpassed.
Laser: activated (ON), not activated (OFF).
The graphic display (3)
shows the temperature as
a moving bar graph. The
last ten measurements
are shown.
The minimum and
maximum temperature
scale of the graph is set
automatically by the unit
(Auto Range Feature).
Recall previous display
by pushing ENTER (D).
Change the settings in the
unit by using the DIP
switches located in the
battery compartment (see
BATTERIES section).
Lock: Trigger locked (ON)
or unlocked (OFF).
°C/°F: changes between
°C and °F.
Buzzer:Audible alarm ON
or OFF.
SETTINGS SETTINGS