Furuno 1761 MARK-3 - Manual (Page 23)

2-12
If the output format is FURUNO CIF a jumper
wire must be connected to “JUP1” on the SPU
Board in the display unit. Note that for CIF
format the bearing measurement method
(Magnetic or True) does not appear for bear-
ing to waypoint data.
Figure 2-15 Navigation Data on the Screen
MAG 115.0°
12
NM
3.0NM
IR
GUARD
Waypoint
LL
34°38.99S
135°19.22E
HD 115.0° CRS 118.0°
WP
6.0 NM
171.6° M
SPD
4.3 KT
EBL
48.1°R 315.1° R
9.05 NM VRM
2.62 NM
Own ships position
(latitude and longitude)
Ship's heading
Range to Waypoint
Bearing to Waypoint
Ship's speed
Ship's course
M:Magnetic
T:True
(M or T appear in CIF format.)