Furuno 1761 MARK-3 - Manual (Page 4)

ii
DANGER
Before turning on the radar
make sure no one is near the
scanner unit.
Prevent the potential risk of
someone begin struck by the
rotating antenna and exposure
to RF radiation hazard.
WARNING
Do not open the equipment.
Improper handling can result in electrical
shock. Only qualified personnel shold
work inside the equipment.
Do not disassemble or modify the
equipment.
Fire electrical shock or serious injury can
result.
Turn off the power immediately if water
leaks into the equipment or the equip-
ment is emitting smoke or fire.
Continued use of the equipment can
cause fire or electrical shock.
Do not place liquid-filled containers on
the top of the equipment.
Fire or electrical shock can result if a liquid
spills into the equipment.
WARNING
Use the proper fuse.
Fuse rating is shown in the chapter 5.
Use of a wrong fuse can result in equipment
damage
Do not operate the equipment with wet
hands.
Electrical shock can result.
Do not use the equipment for other than
its intended purpose.
Use of the equipment as a stepping stool,
for example, can result in personal injury
or equipment damage.
No one navigation device should ever be
solely replied upon for the navigation of
a vessel.
Always confirm position against all available
aids to navigation, for safety of vessel and
crew.
CAUTION
Two warning labels are attached to the display
unit and scanner unit. Do not remove these labels.
If labels are peeling off or are illegible, contact
a FURUNO agent or dealer.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
<Display Unit>
Name: Warning Label (1)
Type: 86-003-1011-0
Code no.: 100-236-230
WARNING
Radiation hazard. Only qualified
personnel should work inside scanner.
Confirm that TX has stopped before
opening scanner.
<Scanner Unit>
Name: Radiation Warning
Label
Type: 03-142-3201-0
Code no.: 100-266-890