Furuno NAVpilot NAVpilot-500 - Manual (Page 47)

4. MENU OPERATION
4-10
4.1.3 Setting the units of measurements
The DISPLAY SETUP menu allows you to choose units of measurement.
1. Press the [STBY] and [MENU] key in order to open the STBY mode menu.
2. Rotate the [ENTER] knob to select “DISPLAY SETUP”.
3. Press the [ENTER] knob to show the display setup menu.
SPEED UNIT:
RANGE UNIT:
nm
WIND SPEED UNIT: kt
DEPTH UNIT: ft
WATER TEMP UNIT: F
POSITION FORMAT
DD MM. MMM"
NEXT PAGE
kt
PREVIOUS PAGE
HEADING READOUT:
MAGNETIC
SPEED READOUT: SOG
ANALOG INDICATOR BAR:
RUDDER
DATE FORMAT: MMM. DD. YYYY
TIME FORMAT:
24HOUR
Page 1
Page 2
Display setup menu
To change pages, select “▼NEXT PAGE” or “▲PREVIOUS PAGE” and press the [ENTER]
knob.
4. Rotate the [ENTER] knob to select the item desired.
5. Press the [ENTER] knob to show the speed unit options window. The example below
shows the speed unit options.
km/h
MPH
kt
Speed unit options window, for example