Foster live quality 7331 230 - Manual (Page 10)

24
Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning
the control panel can be locked (with exception to the On/Off key [ ]).
 Locking :
Action Control panel Display
Start Press key [ ] 3 or 4 x [ 0 ] or [ H ]
Hob locking Press simultaneously [ - ] and [ + ]
at front right** No modification
Repress key [ + ] 3 or 4 x [ L ]
 Unlocking :
Action Control panel Display
Start Press key [ ] 3 or 4 x [ L ]
In the 5 seconds after start :
Unlocking the hob
Press simultaneously [ - ] and [ + ]
at front right** 3 or 4 x [ 0 ]
Repress key [ - ] No light on the
Displays
** for the 3 zone hob use [ + ] from the front left zone display
COOKING ADVICES
Pan quality
Adapted materials :
steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
aluminium with ferromagnetic bottom.
Not adapted materials :
aluminium and stainless-steel without ferromagnetic bottom,
cupper, brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
 Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
 A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn’t mean any failure on the appliance and doesn’t influence the cooking operating.
Pan dimension
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking
zone.