Fender BXR 300C - Manual (Page 7)

SPECIFICATIONS
POWER AMPLIFIER SECTION:
Power output 300 Watts
Rated load impedance 4 Ohms
Distortion at rated power Less than .05%
Damping factor, at 4 Ohms Greater than 100
Power bandwidth 20 Hz - 20 kHz
Input sensitivity 1.33 volt R.M.S.
Input impedance >10k Ohms
Slew factor Greater than 1
Signal to noise ratio -100 dB Re/300 Watts
DELTACOMP™ range 20 dB
PREAMP :
Input impedance: Input 1 > 100k Ohms
Input 2 > 800k Ohms
Sensitivity: Volume at max., enhance Input 1 < 10mV
buttons out, all equalization Input 2 < 20mV
controls at 12 o'clock, power
amp at 300 Watts, 4 ohms
Equalization range:
Enhance: Low +9dB at 80 Hz.
High +12dB at 5kHz.
Bass: +/- 14dB at 40 Hz.
Treble: +/- 17dB at 5kHz.
Mid: +/- 20 dB at 150 Hz through 4kHz.
Overall signal to noise ratio, volume at min., -95 dB below
rated output
PHYSICAL SPECIFICATIONS:
BXR 300R
Width (rack ears installed) 19 inches
Width (without rack ears) 17 inches
Height 3.5 inches
Depth 10.125 inches
Weight 19 lbs.
BXR 300C
Width 21-7/8 inches
Height 29-11/16 inches
Depth 15-5/8 inches
Weight 78 lbs.
Speaker 1 -15" Fender Special
Design (part number 027577)
A product of:
FENDER MUSICAL INSTRUMENTS
1130 Columbia Street, Brea, California