FORD M-6007-XEFMS - Manual (Page 11)

M-6007-XEFMS
340 HP Crate Engine
GUIDE
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS.
Techline 1-800-367-3788 Page 11 of 13 IS-1850-0290
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
OIL PANS
The M-6007-XEFMS comes with a production 1991-1995 Mustang rear sump oil pan. The oil pan may need to be
changed to properly fit and function in your application.
VALVE COVERS
The M-6007-XEFMS comes with M-6000-K302R valve covers. Make sure the valve covers are correct for
your application.
INDUCTION
1. The M-6007-XEFMS does not include intake manifold. For carbureted applications, Performer
RPM recommended.
2. If you are using a different intake, verify that the intake gasket fits the ports on the cylinder head and intake
manifold correctly before installing the intake manifold.
3. M-9439-A50 intake gasket recommended.
FUEL DELIVERY
1. 302 engines 600 cfm carb
2. 24 lb. injectors up to 345 hp on 8-cylinder engine (naturally aspirated)
3. 30 lb. injectors up to 430 hp on 8-cylinder engine (naturally aspirated)
4. 31 lb. injectors up to 445 hp on 8-cylinder engine (naturally aspirated)
HEADERS
The horsepower numbers shown for the Ford Racing engines were obtained using long tube headers.
M-6007-XEFMS CRATE ENGINE FEATURES
•
E303 Camshaft - automatic or manual transmission
•
302 cubic inch
•
340 hp @ 5500 rpm
•
9.0:1 compression ratio (nominal)
•
Neutral balance rotating assembly
• Forged steel Sportsman crankshaft