Fisher-Price M7332 - Manual (Page 5)

5
Assembly
• Fit two pedal hubs onto the pedal axle tabs. Make sure the
tabs fit into the slot in each pedal hub.
Pedal Hub
Pedal Hub
Pedal Axle
Tab
Tab
Slot
• While holding the pedal
hubs on the pedal axle,
insert the pedal axle through the hole in the center of the
front wheel.
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
Hole
Pedal Axle
Pedal Hubs
Front Wheel
• Place a scrap block of wood under the front wheel assembly
with the exposed end up.
• Fit a pedal on the pedal axle.
• Tap the pedal with a hammer until it is secure.
Pedal Axle
Front Wheel Assembly
Pedal
Pedal Hub
Pedal Hub
Pedal Axle
• Turn the front wheel
assembly over.
• Insert a pedal hub onto the top of the pedal axle and into
the hole in the center of the front wheel.
• Insert the remaining pedal hub below the pedal axle and
into the hole in the center of the front wheel.
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
4
5
6
7