Fisher-Price M7332 - Manual (Page 7)

7
• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
Seat
Helpful Hint: The seat can be attached to the frame in any of
three positions, depending on the size of your child. Check
your child’s fit on the trike by observing the seat to pedal
distance, as it is being ridden. If the pedals seem too far
away or too close for your child, move the seat up or down.
Attaching the Seat
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
One-time assembly is now complete.
Label Decoration
Lower Position Middle Position Upper Position
Tabs
Slots
Seat
Retainer
1
2
6
7
7
IMPORTANT! It is a good practice to start training children
very young regarding the importance of helmet use. When
children are older and riding bicycles and faster vehicles,
it is important that they use a helmet each and every time
they ride. For this reason, even while riding a tricycle, it is
a good idea to familiarize your child with helmet use, so that
it becomes a habit for life. Choose a helmet that complies
with requirements of the applicable certifying agency for
bicycle helmets.
(Label 5 on other side)
4
3