FujiFilm FinePix A235 - Manual (Page 92)

86
Warning Messages and Displays
Warning Warning Description Description Solution Solution
FRAME NO. FULL
The camera has run out of frame numbers
(current frame number is 999-9999).
Format the memory card and select RENEW for the
b FRAME NO. option in the j SETUP menu. Take
a picture to reset frame numbering to 100-0001,
then return to the b FRAME NO. menu and select
CONTINUOUS.
TOO MANY FRAMES
Date for which more than 4,999 pictures exist
selected in sort-by-date view.
Choose a different date.
PROTECTED FRAME
An attempt was made to delete or rotate a
protected picture. Remove protection before deleting or rotating
pictures.
x NO IMAGE
The source device selected in the playback
COPY menu contains no pictures.
Select a different source.
d NO IMAGE
p CAN NOT TRIM An attempt was made to crop a p picture.
These pictures can not be cropped.
CAN NOT TRIM
The picture selected for cropping is damaged
or was not created with the camera.
DPOF FILE ERROR
The DPOF print order on the current memory
card contains more than 999 images. Copy the pictures to internal memory and create a
new print order.
CAN NOT SET DPOF The picture can not be printed using DPOF. —
A CAN NOT SET DPOF Movies can not be printed using DPOF. —
CAN NOT ROTATE The picture can not be rotated. —
A CAN NOT ROTATE Movies can not be rotated. —
PRESS AND HOLD THE DISP
BUTTON TO DEACTIVATE
SILENT MODE
An attempt was made to choose a flash
mode or adjust the volume with the camera
in silent mode.
Exit silent mode before choosing a flash mode or
adjusting the volume.
COMMUNICATION ERROR
A connection error occurred while pictures
were being printed or copied to a computer
or other device.
Confirm that the device is turned on and that the USB
cable is connected.