FARGO electronic C25 - Manual (Page 5)

Person a C11 and M11 Persona CardJet C7
C11: Dye-Sublimation / Resin Thermal Transfer
M11: Resin Thermal Transfer
Thermal Inkjet
300 dpi (11.8 dots/mm) 600 dpi
C11: Up to 16.7 million / 256 shades per pixel
M11: Monochrome
Up to 16.7 million / 256 shades per pixel
C11: Full-color with resin black, YMCKO**, 250 prints
Dye-sublimation black, BO**, 500 prints
C11/M11: Resin black, green, blue, red, white, silver, gold and scratch-off, 1000 prints
SmartLoad™ Ink Cartridges:
Full-color, 250 prints; Black, 750 prints (For use with infrared bar codes only)
SmartLoad Ink Cartridges feature an exclusive ink-level gauge that
reports remaining prints and alerts user when ink is low or out.
C11: 30 seconds per card / 120 cards per hour (YMCKO)*
C11/M11: 5 seconds per card / 720 cards per hour (K)*
Fast print quality: 26 seconds per card / 138 cards per hour
Normal print quality: 42 seconds per card / 85 cards per hour
Best print quality: 76 seconds per card / 47 cards per hour
CR-80 (3.375"L x 2.125"W / 85.6mmL x 54mmW)
CR-79 Adhesive Back (3.303"L x 2.051"W / 83.9mmL x 52.1mmW)
CR-80 CardJet Cards (3.375"L x 2.125"W / 85.6mmL x 54mmW)
CR-80 edge-to-edge (3.37"L x 2.11"W / 85.5mmL x 53.5mmW) Over-the-edge on CR-80 CardJet Cards
.020" (20 mil) to .030" (30 mil) / .5mm to .76mm .030" (30 mil) / .76mm
PVC or polyester cards with polished PVC finish;
monochrome resin ribbon required for 100% polyester cards
FARGO CardJet Cards
45 cards (.030" / .762mm)
SmartLoad Card Cartridge: 50 pre-loaded CR-80 CardJet Cards
SmartLoad Card Cartridges make card loading a snap and feature
exclusive technology that tells you when to install a new card cartridge.
Attachable Card Output Hopper; 35 cards (.030" / .762mm) 50 cards (.030” / .762mm)
2MB RAM 2MB RAM
N/A N/A
® Windows 95/98/Me/NT 4.0/2000/XP
ISO Magnetic Stripe Encoding Module, high- or low-coercivity
(specify when ordering; low-coercivity not available on M11), Tracks 1, 2, and 3
High-Coercivity Magnetic Stripe Encoding Module (Field installable)
® IBM-PC or compatible, Windows 95/98/Me/NT 4.0/2000/XP, Pentium class 133MHz com-
puter with 32MB of RAM or higher, 200MB free hard disk space or higher, ECP parallel
port with DMA access
with 32MB of RAM or higher, 200MB free hard disk space or higher, USB 1.1
Centronics Parallel, IEEE 1284 compliant USB 1.1
65º to 80º F / 18º to 27º C 59° to 95° F / 15° to 35° C
20 - 80% non-condensing 20 - 80% non-condensing
6.7"H x 13.1"W x 10.5"D / 170mmH x 333mmW x 267mmD 8.0"H x 18.0"W x 14.0"D / 203mmH x 457mmW x 356mmD
15 lbs. / 7 kg 19.4 lbs. / 8.8 kg
Ice Blue Ice Blue
Safety: UL 1950, cUL 1950, TÜV-GS (EN 60950), CE, CCC
Emissions: FCC Class B, CRC c1374, Class B, ITS EMC, CE, CCC Safety: UL 60950, CSA C22.2 (No. 60950) and UL-GS (EN 60950 A1-A4, A11), CE
Emissions: CE, CRC c1374, ITS (EN 55022 Class B: 1995), FCC Class B, EN 55024: 1997
100 - 240 VAC, 1.9 A 100 Ð240 VAC, 1.0 A
47 Hz - 63 Hz 50 Hz Ð 60 Hz
Printer - One year
Printhead - One year/unlimited pass with UltraCard™ Cards.
Printer - One year
• External Print Server • USB-to-Parallel Interface Cable
(Windows only; required for stand-alone (Windows 98/Me/2000/XP only)
networking of printers.) • Printer Cleaning Kit
N/A
® IBM-PC or compatible, Windows 98/Me/2000/XP, Pentium class 133MHz computer
® Windows 98/Me/2000/XP
•
Specifications
Print Method:
Resolution:
Colors:
Print Speed:*
Print Area:
Accepted Card Types:
Memory:
Display:
Software Drivers:
Encoding Options:
System Requirements:
Interface:
Operating Temperature:
Humidity:
Dimensions:
Weight:
Printer Color:
Agency Listings:
Supply Voltage:
Supply Frequency:
Warranty:
Options:
Print Ribbon Options
or Ink Cartridge
Capacity:
Accepted Standard
Card Sizes:
Accepeted Card
Thickness:
Output Hopper
Card Capacity:
Input Hopper Card
Capacity or Card
Cartridge Capacity:
Print speed will vary depending on the amount of color coverage within a card design. The above print speeds represent a full-color, full-bleed design; designs with
less color coverage will print faster. Print speed indicates an approximate batch print speed and is measured from the time a card feeds into the printer to the time it
ejects from the printer. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the
file, the CPU, amount of RAM and the amount of available resources at the time of print. *
** Indicates the ribbon type and the number of ribbon panels printing where Y=Yellow,
M=Magenta, C=Cyan, K=Resin Black, B=Dye-Sublimation Black and O=Overlay.