Testing and maintenance, Warranty information, Testing – Firex SERIES 10000 User Manual

Page 8: Maintenance and care danger, Cleaning, Replacing the battery (model coe and coe-b), Warning, Where to send your alarm for service

Advertising
background image

8

TESTING AND MAINTENANCE

Testing

Stand-alone units: Test each alarm regularly to be sure it is operating properly.

Interconnected units: Test each alarm in an interconnected system regularly.

• The Smart Button accurately tests all functions. DO NOT use an open flame to test

this CO alarm. You may ignite and damage the smoke alarm or your home.

• Test alarms weekly and upon returning from vacation or when no one has been in

the household for several days.

IMPORTANT! Refer to “Understanding the Alarm LEDs and Horn Patterns” chart
so you understand how to tell if your alarm is operating properly.

Maintenance and Care

DANGER

ELECTRICAL SHOCK HAZARD. Turn off power at main service panel
by removing fuse or switching appropriate circuit breaker to OFF
position BEFORE cleaning CO alarm or replacing the battery.

Cleaning

IMPORTANT: Do not attempt to remove the cover or clean inside the alarm.
THIS WILL VOID YOUR WARRANTY.

Clean the cover at least once a month using the soft brush or wand attachment to a
vacuum cleaner. Be sure all the vents are free of debris. If necessary, use a damp cloth
to clean residual dirt. Do not use abrasive cleansers or spray the alarm with cleaning
agents or waxes, especially cleaners containing ammonia. These liquids may impair the
performance of sensors. Do not submerge the alarm in water.

Replacing the Battery (Model COE and COE-B)

Replace the battery at least once a year or immediately when the low battery
warning activates. If a replacement battery is not immediately available, push
the Smart Button to silence the Low Battery Warning for approximately 10
hours. If alarm does not silence, replace the battery immediately.

WARNING

Use only Eveready 522, Duracell MN 1604 or Ultralife U9VL-J batteries! DO NOT
USE ANY OTHER TYPE OF BATTERY. DO NOT USE RECHARGEABLE BATTER-
IES. Refer to the Installation section if you are not familiar with the proper way
to install a new battery.

Where to send your alarm for service

Not attempt to repair this combination alarm. Doing so will void your
warranty.
If the alarm is not operating properly, see “Troubleshooting.” If you must
return an alarm under warranty, send the alarm in a well-padded envelope with
postage prepaid, a note describing the nature of the difficulty, and proof of date of
purchase to:

In U.S.:

In Canada:

Invensys Controls Americas

Invensys Controls Americas

28C Leigh Fisher Blvd.

Service de réparation

El Paso Texas 79906

3505 Laird Road - Unit #14

United States of America

Mississauga Ontario L5L 5Y7

If the CO alarm is no longer under warranty, have a licensed electrician replace the
CO alarm immediately with a comparable Firex brand alarm.

For Technical Support:
Phone: (800) 445-8299
Email: [email protected]
Website: www.icca.invensys.com/firex

WARRANTY INFORMATION

5-YEAR LIMITED CO ALARM WARRANTY

Invensys Controls Americas warrants to the original consumer purchaser each new
CO alarm to be free from defects in material and workmanship under normal use
and service for a period of five (5) years from the date of purchase. Invensys
Controls Americas agrees to repair or replace, at its option, any defective CO alarm
provided it is returned with postage prepaid and with proof of purchase date to
Invensys Controls Americas. This warranty does not cover damage resulting from
accident, misuse or abuse or lack of reasonable care of the product. This warranty
is in lieu of all other express warranties, obligations or liabilities. THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE LIMITED TO A PERIOD OF FIVE (5) YEARS FROM THE DATE OF PURCHASE
FOR THE CO ALARM. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you. IN NO CASE SHALL
INVENSYS CONTROLS AMERICAS BE LIABLE FOR ANY INCIDENTAL OR CON-
SEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS
CAUSED BY ITS NEGLIGENCE OR FAULT. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights, and
you may also have other legal rights which vary from state to state. This product
meets all the requirements of U.L. Standard 2034.

Controls Americas
191 E. North Avenue
Carol Stream Illinois 60188
©2006 Invensys Controls Americas

110-1125C

110-1125C Eng 2/22/06 11:32 AM Page 8

Advertising