Fujioh FDR-4200D - Manual (Page 8)

8
Re-assembly will be done by following the opposite ways of disassembly procedures
described in Item “Disassembling”.
(1) Make sure that the filters, Rectifier Baffle Panel, oil tray, oil receiving cover, etc. are
fixed in the appropriate positions firmly.
(2) Make sure that there is no abnormal vibration sound when running.
Re-assembling
2 Rectifier Baffle Panel
Wash the Rectifier Baffle Panel in tepid water
with a neutral detergent dissolved, then after
washed in water, wipe it off thoroughly with a
dry cloth.
3 Range Hood Body
After wiping the range hood body off with a
cloth immersed in a neutral detergent and
wring tightly, wipe off moisture thoroughly with
a dry cloth.
1 Remove the fixing screw to open the lamp
cover.
2 Replace the burnt out light bulb to a new
one.
NOTE: If two bulbs are burnt out, replace
them.
3 Fasten the fixing screw firmly after closing
the cover.
Two 60 W light bulbs can be mounted to this range hood.
Prior to replacing the light bulb, purchase a mini-light bulb (in the base diameter 26 mm),
rated 120 V - 60 W or below.
Replacing the Light Bulb