FilterStream D4500 - Manual (Page 15)

15
Dust, dirt and debris suctioned
off by your Vacuum Chamber will
collect in the Dust Drawer’s
Stainless Steel Pre-Filter Screen
and HEPA Filter. To empty/clean
these parts, please follow these
steps:
1.Remove the Dust Drawer
Holding the Vacuum Chamber
Housing with one hand use the
other hand to pull the Dust
Drawer from the unit.
(see figure 9)
2.Cleaning the Dust Drawer
The Dust Drawer with Stainless
Steel Pre-Filter Screen can be
cleaned by emptying the dust
in the trash, or preferably, in
the sink under running water
(see figure 10) to ensure that
dust particles are not
reintroduced to the household.
Thouroughy dry the Dust
Drawer and the Pre-Filter
Screen after cleaning to
prevent moisture from getting
on the HEPA filter.
M A I N T E N A N C E
9 Fig.
10 Fig.