FilterStream D4500 User Manual
Page 16
M A I N T E N A N C E
16
3.Cleaning HEPA Filter
To remove the HEPA Filter
from the Vacuum Chamber
Housing, insert your thumb
and middle finger into the
opening where the Dust
Drawer was located and lift the
HEPA filter out. Use your
finger to lightly clean the
paper surface of the HEPA
Filter, clearing off any dirt,
dust, and hair. You can also
gently tap the HEPA Filter on
the edge of the garbage can
or sink face down for
additional cleaning.
(see figure 11)
Note: Do not wash the HEPA
filter. Water will permanently
damage the filter.
11
Fig.
4.Cleaning Vacuum Chamber
Cleaning Interior: Remove any
dust that may build up inside
the Vacuum Chamber with a dry
cloth.
Cleaning Exterior: Clean the
Vacuum Chamber’s exterior
with a damp cloth
Warning: Never immerse the
Vacuum Chamber in water
This may damage the electrical
contacts and circuitry inside
the unit.