FUJITSU MB2142-02 - Manual (Page 11)

5
■ LAN specifications
Table 1.2b lists the LAN specifications.
An RJ45 type LAN connector (8-conductor modular connector, 10BASE-T-compatible) is used.
Note: To set the IP address, port address, or Ethernet local address, use the LAN
address write program supplied with the emulator debugger. Execute the
program from the host machine, via the RS-232C interface.
For more information, refer to the Emulator Debugger Installation Guide.
Table 1.2b LAN specifications
Item Contents
Communications
method
TCP/IP
IP address Variable
Port address Variable
Ethernet address Global address/local address
Ethernet global
address
Fixed (IEEE registered)
Ethernet local address Variable