Foxconn Interfacility Link 7870 - Manual (Page 23)

2.6 Aligning the Fiber Optic Link
7870 Interfacility Link Installation and User’s Guide page 15
Foxcom proprietary information
2.6 Aligning the Fiber Optic Link
The final step in installing the 7870 Interfacility Link is
re-adjusting the Receiver Gain Control for unity gain.
To set the unity gain (standard version)
1. Set the Signal Generator to -15 dBm. Alternatively measure the
operational input level.
2. Set up the system as shown in
Figure 12 Fiber Optic Alignment Setup
3. Adjust the Receiver Gain Control for -15 dBm reading on the
power meter.
Figure 12 Fiber Optic Alignment Setup