Fcc information, Energy declaration – FUJITSU TE988G User Manual

Page 2

Advertising
background image

Fujitsu TE988G Color Monitor

1

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and if
not installed and used in accordance with the instruction manual may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:

(1).

Reorient the receiving antenna.

(2).

Increase the separation between the equipment and receiver.

(3).

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

(4).

Consult the dealer or an experienced radio TV technician for help.

Notice:

(1) The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

(2) Shielded interference cables must be used in order to comply with the emission

limits.

Energy Declaration

This monitor is equipped with a function for saving of energy which supports the VESA

Display Power Management Signaling ( DPMS ) standard. This means that the monitor must

be connected to a computer which supports VESA DPMS to fulfill the requirement in the

NUTEK specification. Time settings are adjusted from the system unit by software. From

indicated inactivity to Power Saving Position A2 the total time must not be set to more than

70 minutes.

NUTEK

VESA State

LED Indicator

Power Consumption

Normal operation

ON

Green

120W (Max.)

Power Saving Position A1

SUSPEND

Orange

15W (Max.)

Power Saving Position A2

OFF

Orange-flash

5W (Max.)

We recommend you to switch off the monitor when it is not in use for quite a long time.

Advertising