Fisher-Price 79667 - Manual

Assembly
Note: The toys on the mobile shown on this instruction sheet may be different from those on your product.
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.
79667, B0639
Instructions
• Loosen and remove the screw and lock nut from the
motorized frame tube. Throw away the screw and lock nut.
• Press the button on the motorized frame tube and remove
the seat.
1
• Press the buttons on the back of the motorized frame while
pushing the legs inward.
Button
Button
2
• Lay the swing on it’s side.
• Press the buttons in the motorized frame tubes.
• Remove the motorized frame. Throw away the
motorized frame.
Motorized
Frame Tube
Buttons
Press Button
3
• While pressing the upper button on the right leg, fit it into
the tube in the new motorized frame. Make sure the upper
button on the right leg “snaps” into the hole in the tube.
• Repeat this procedure to assemble the left leg to the new
motorized frame.
• When the legs are assembled correctly to the tubes in the
motorized frame, you should not see the red dots.
Tube
Hole
Red Dot
New Motorized Frame
Button
4