Assembly – Fisher-Price 79667 User Manual
Page 2
Assembly
• Stand the assembly upright.
• Pull the legs out so that the buttons “snap” into the holes in
the motorized frame.
• When standing behind the product, all four feet should be
flat upon the floor. And, check for an L marking on the left
foot and an R marking on the right foot.
• If the feet are not flat upon the floor, or the left and right feet
have been reversed, remove both lower legs from the upper
legs. Replace them onto the opposite upper leg.
Feet
Feet
Button
Button
L
R
5
PRINTED IN CHINA
79667a-0922
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Motorized
Frame Tube
Hole
• Press the button on the seat tube and slide the seat tube
into the motorized frame tube. Make sure the button on
the seat tube “snaps” into the larger hole in the motorized
frame tube.
Press Button
6
7
M5 x 30mm Screw
BOTH SHOWN ACTUAL SIZE
Rounded
Side
• Insert the new screw
into the smaller hole in
the motorized frame tube.
Hint: You may need to tap the screw with a hammer or twist the
screw to completely insert it through the hole.
• Attach the lock nut, rounded side facing out, to the screw.
• Tighten the screw with a Phillips screwdriver.
M5 Lock Nut