FUJITSU BX900 S1 - Manual (Page 107)

BX900 S1 Operating Manual 107
Hot-plug components
8.2.5 Connection Blade Ethernet Pass Thru 10Gb 18/18
The Connection Blade Ethernet Pass Thru 10Gb 18/18 provides the following
connections:
– 18 internal ports to the server blades at 10 Gbit/s and 1 Gbit/s link speed
– 18 external uplink ports at 10 Gbit/s and 1 Gbit/s link speed through
SFP+/SFP modules
This connection blade can be used in connection blade slots CB1/2 (fabric 1),
CB3/4 (fabric 2) and CB5/6 (fabric 3), see
figure "Connection blade slots" on
page 117 . 10 GbE connection blades in slots CB3/4 (fabric 2) and CB5/6 (fabric
3) only support server blades that are fitted with a 10 GbE mezzanine cards or
10 Gb CNA mezzanine cards.
Ports and LEDs
Figure 38: Connection Blade Ethernet Pass Thru 10Gb 18/18
1 2
A
A 3