FRIGIDAIRE 2020266A0107 - Manual (Page 5)

6. The TIMER function enables you to either Delay Start or Delay Stop the unit in the choice from 0.5 hour to 24 hours.
If the unit is running then selecting Timer will turn the unit off after setting hours (Delay Stop). If the unit is off then
selecting Timer will turn the unit on after setting hours (Delay Start).
TIMER setting: First press TIMER button, then to adjust timer setting, tap or hold the or button to change the
delay timer at 0.5 hour increments,up to 10 hours, then by 1 hour increments up to 24 hours. The control will count
down the time remaining (8,7.5,7, etc.) until the unit either starts or stops. For the Delay Start, the fan speed and
humidity maintained will be the same as previously setting. After TIMER setting finishs, pressing TIMER button again
at any time will cancel the TIMER function. The Delay Start/Stop Feature will work until the unit either starts ro stops.
Once that happens the above steps have to be repeated again.
5
2009 Electrolux Home Products, Inc. All rights reserved.
Operating Instructions
(continued)
1. Before entering TIMER setting, the power indicator must be lit to make sure power is being supplied to the unit.
2. Before entering TIMER setting, make sure first pressing HUMIDITY or button sets one desired room humidity.
NOTE:
7. To shut the unit down, press the ON/OFF button.
While the unit is plugged in the power indicator will remain lit. Only removing the plug will extinguish this light.
NOTE:
Operating Instructions