About this document, Document conventions, Typographic conventions – Fortinet Network Device IPS User Manual
Page 6: Fortinet documentation
FortiGate IPS User Guide Version 3.0 MR7
6
01-30007-0080-20080916
About this document
Introduction
About this document
Document conventions
The following document conventions are used in this guide:
• In the examples, private IP addresses are used for both private and public IP
addresses.
• Notes and Cautions are used to provide important information:
Typographic conventions
FortiGate documentation uses the following typographical conventions:
Fortinet documentation
The most up-to-date publications and previous releases of Fortinet™ product
documentation are available from the Fortinet Technical Documentation web site
at
.
The following
is available:
• FortiGate QuickStart Guide
Provides basic information about connecting and installing a FortiGate unit.
Note: Highlights useful additional information.
!
Caution: Warns you about commands or procedures that could have unexpected or
undesirable results including loss of data or damage to equipment.
Convention
Example
Keyboard input
In the Gateway Name field, type a name for the remote VPN
peer or client (for example, Central_Office_1).
Code examples
F-SBID (--protocol tcp; --flow
established; --content "content here";
--no_case)
CLI command syntax
config firewall policy
edit id_integer
set http_retry_count <retry_integer>
set natip <address_ipv4mask>
end
Document names
FortiGate Administration Guide
File content
<HTML><HEAD><TITLE>Firewall
Authentication</TITLE></HEAD>
<BODY><H4>You must authenticate to use this
service.</H4>
Menu commands
Go to VPN > IPSEC > Phase 1 and select Create New.
Program output
Welcome!
Variables
<address_ipv4>