Starting up and operation, Access to the drives (floorstand model), Access to the accessible drives – FUJITSU Server TX200 S6 User Manual
Page 65: Starting up and operation" on, 5starting up and operation, 1 access to the drives
Advertising
TX200 S6
Operating Manual
65
5
Starting up and operation
V
CAUTION!
Follow the safety instructions in chapter
.
5.1
Access to the drives
(floorstand model)
5.1.1
Access to the accessible drives
Figure 12: Removing the drive cover and snapping it into the hard disk drive cover
Ê
Unlock the server (1).
Ê
Remove the drive cover (2).
Ê
Place the drive cover on the hard disk cover (3).
I
Please note the following when operating with tape drives:
If the system is programmed to eject the media automatically, the
accessible drives must not be obstructed.
The drive cover is replaced and the server locked in the reverse order.
/
0
1
Advertising