Fujitsu Siemens Computers LifeBook A3130 - Manual (Page 71)

61
T r o u b l e s h o o t i n g
[Calibrate Now]
The calibration is executed. Please position the
computer as horizontally as possible, then click the
[Calibrate Now] button. The current horizontal position
will be recognized as the true horizontal by performing
the calibration.
3. Click the [OK] or [Cancel] button. The [Setup]
window closes.
Using the Shock Sensor Monitor Window
Right-click the Shock Sensor Utility icon in the Notifica-
tion Area at the bottom-right of the screen, and select
[Monitor] from the menu. The Monitor window
appears.
Note that the Monitor is designed for entertainment,
and has no effect on system settings or orientation. To
navigate the monitor, use the buttons described below.
■ Advance. Incline the display to the hinge side, or use
[Up] key.
■ Back. Incline the display to the mouse-button side, or
use [Down] key.
■ Right. Incline the display to the right side, or use
[Right] key.
■ Left. Incline the display to the left side, or use [Left]
key.
■ Go up. Use [A] key.
■ Go down. Use [Z] key.
■ Close. Use [Esc] key.
AUTOMATICALLY DOWNLOADING
DRIVER UPDATES
Your system has a convenient tool called the Fujitsu
Driver Update (FDU) utility. With FDU, you can choose
to automatically or manually go to the Fujitsu site to
check for new updates for your system.
The FDU icon should appear in the system tray at the
bottom right of your screen (roll the cursor over the
icons to find the correct one). If the FDU icon does not
appear in the system tray, it can be started by going to
[Start] -> All Programs, and clicking on Fujitsu Driver
Update; this will create the icon automatically.
To invoke the FDU menu, right-click on the FDU icon.
The menu contains the following items:
■ Check for updates now
Allows for manual driver update search. The first
time it is used, you are prompted to agree to a user
agreement. After clicking on the icon, the FDU auto-
matically connects with the Fujitsu site to check for
updates and downloads them. While downloading,
the icon has a red bar through it, indicating that it
cannot be used while the download is in process.
When the update is complete, a message appears
informing you of the fact
.
■ Enable Automatic Update Notifications
Automatically searches for new updates on a regular
basis (approximately every 3 days).
■ Show update history
Brings up a screen that displays a history of updates
that have been made via the FDU.
■ About Fujitsu Driver Update
Displays the FDU version number and copyright
information
■ Fujitsu Driver Update Readme
Displays the FDU readme.
falcon3.book Page 61 Thursday, May 24, 2007 8:44 AM