Fisher SC-TA3000 - Manual (Page 5)

5
USING THE VACUUM CLEANER
1. Attach the floor nozzle and main unit together.
2. Remove the dust container and connect the handle and main unit together.
3. Attach the crevice tool, wand and brush into the tool holder.
4. Connect the power cord plug to the outlet.
[HOW TO DETACH THE FLOOR NOZZLE]
To detach the
floor nozzle, insert
a screwdriver into
the hole and pull
up while pushing
the lock button.
Insert the handle into the
hole in the main unit and
press tightly, as shown. Insert the bolt and nut
into the bolt hole.
ATTACHMENT HOLDER
Make sure the power cord plug is tightly
inserted and secured in place.
BRUSH
CREVICE TOOL WAND
From the back side,
using a screwdriver,
twist and attach the nut
and bolt.
Floor Nozzle
Detach Hole
Lock Button
HANDLE
NUT
BOLT
1 2 3