Fujitsu Siemens Computers LifeBook A6210 User Manual
Page 97
97 - Troubleshooting
The display goes blank by
itself after you have been
using it.
The notebook has gone
into Video timeout,
Sleep mode, or Save-
to-Disk mode because
you have not used it for
a period of time.
Press any button on the keyboard, or move the mouse to restore
operation. If that fails, push the Power/Suspend/Resume button.
Check your power management settings, or close your applica-
tions and go to the Power Savings menu of the setup utility to
adjust the timeout values to better suit your operation needs.
Power management
timeouts may be set for
short intervals and you
didn’t notice the display
come on and go off.
Press any button on the keyboard, or move the mouse to restore
operation. If that fails, push the Power/Suspend/Resume button.
(The display may be shut off by Sleep Mode, Auto Suspend or
Video Timeout)
Your display won’t turn on
when the system is turned
on or when it has resumed.
The system may be
password-protected.
Check the status indicator panel to verify that the Security icon is
blinking. If it is blinking, enter your password.
The Built-in Display does
not close.
A foreign object, such
as a paper clip, is stuck
between the display
and keyboard.
Remove all foreign objects from the keyboard.
The display has bright or
dark spots.
If spots are tiny and few,
this is normal for a large
display.
This is normal; do nothing.
If spots are numerous
or large enough to inter-
fere with your operation
Display is faulty; contact your support representative.
The application display
uses only a portion of your
screen and is surrounded
by a dark frame.
You are running an app-
lication that doesn’t
support the system’s
native pixel resolution
and display compres-
sion is enabled.
Display compression gives a clearer but smaller display for appli-
cations that do not support the system’s native pixel resolution.
You can fill the screen but have less resolution by changing dis-
play compression settings. These settings can be changed in the
Intel GMA control panel.
Problem
Possible Cause
Possible Solutions