Fisher & Paykel 525911L - Manual (Page 27)

26
1
3
USER MAINTENANCE INSTRUCTION
Cleaning the Drain Filter, Spray Arm,
Filter Plate and Motor Assembly
We recommend the drain filter be cleaned whenever
there is evidence of food particles. The filter plate is
designed to be self cleaning, but food scraps may
accumulate.
The spray arm and filter plate may need cleaning
about once a month in normal use or more often,
should the need arise.
To Clean the Drain Filter
· Lift up the drain filter access panel, if fitted on the
basket.
· Lift and remove the drain filter out of the
DishDrawer.
· Empty, rinse under clean running water, and
replace the drain filter into the allocated space.
The correct placement of the drain filter is shown
in Figure 24.
To Clean the Spray Arm
· Remove the basket carefully. Lift from the back
end first so that you do not knock the detergent
and rinse agent dispenser.
· Lift the spray arm.
· Shake any foreign material out of the spray arm.
· Rinse the spray arm under water and wipe the
spray arm with a damp cloth.
· Replace the spray arm back onto the impeller.
Figure 24 shows the correct placement of the spray
arm.
2
Figure 24 - Internal Parts
of the DishDrawer
Key
1. Spray Arm
2. Filter Plate
3. Drain Filter
Cleaning the DishDrawer TM
The secondary control panel and the front of the DishDrawer may need wiping
down from time to time. This can be done with a clean damp cloth.
We do not recommend the use of the following cleaning agents on or in your
DishDrawer as they may damage it.
· Plastic or stainless steel scouring pads.
· Abrasive, solvent, household cleaners, acid or alkaline cleaners.
· Handwashing liquids, soap, laundry detergents or disinfectants.
If a dishwasher cleaner is used, we would strongly recommend a Heavy Plus wash
program with detergent be used immediately to prevent damage to the DishDrawer.