FUJITSU PRIMERGY RX600 S6 - Manual (Page 121)

RX600 S6 Operating Manual 121
CSS components
Ê Reattach the protective optical port plug to the transceiver optical bores.
I
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
8.2.3.2 Installing SFP+ transceiver modules
Figure 38: Removing the protective optical port plug
Ê
Remove the SFP+ transceiver module from its protective packaging.
Ê Remove the optical port plug from the new / additional SFP+ transceiver
module.
V
CAUTION!
– Always keep the protective port plugs attached to the transceiver
optical bores and fiber-optic cable connectors until you are ready
to make a connection.
– Save the protective port plug for future use.