Fujitsu Siemens Computers C779 - Manual (Page 18)

Colour monitor C779 / 172E
10 - English A26361-K823-Z100-1-5E19 10
OSD menu MENU button Minus button (-) Plus button (+) button
7. GEOMETRY Pressing once:
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode). Adjusts the selected function Back to No. 2
Pressing twice:
Ends the
adjustment mode. Selects the desired function Back to No. 2
The geometry controls enable you to adjust the curves or angles at the corners
of your screen.
PINCUSHION Increases or reduces the curve of the sides either toward
inward or outward.
PARALLELO-
GRAM Increases or reduces the slope of the sides to the left or
right.
TRAPEZOID Increases or reduces the lower screen so that it is exactly
as large as the upper screen.
PINBALANCE Changes the geometry of the screen to the left or right.
ROTATION Turns the entire screen clockwise or anti-clockwise.
8. MOIRE
CONTROL
Pressing once:
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode).
Pressing twice:
Ends the
adjustment mode.
Adjusts the selected function Back to No. 2
9. LANGUAGE
Sets the marked
language and
returns to No. 2 Selects the appropriate language Back to No. 2
10. OSD
POSITION
Moves the OSD
menu horizontally
or vertically. Moves the OSD
menu to the left or
downward Moves the OSD
menu to the right
or upward Back to No. 2