Fujitsu Siemens Computers C779 - Manual (Page 19)

Colour monitor C779 / 172E
A26361-K823-Z100-1-5E19 English - 11 11
OSD menu MENU button Minus button (-) Plus button (+) button
11. COLOR
TEMP
Pressing once:
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode).
When the colour
mode symbol
flashes, press the
button to reach
the colour
adjustment
No. 12.
Selects the desired colour mode Back to No. 1
Pressing twice:
Ends the
adjustment mode. Selects the desired function Back to No. 1
12. COLOR
ADJUST
MODE
Pressing once:
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode). Adjusts the selected function Back to No. 11
Pressing twice:
Ends the
adjustment mode. Selects the desired function Back to No. 11
13. ZOOM
Pressing once:
Selects the
marked function.
The symbol
begins to flash
(adjustment
mode). Reduces the
horizontal and
vertical picture
size Increases the
horizontal and
vertical picture
size Back to No. 1
Pressing twice:
Ends the
adjustment mode. Selects the desired function Back to No. 1
RECALL Activates the factory settings within all menus. If you want to return to the
factory settings, press the RECALL button.
DEGAUSS Degausses the monitor.
During degaussing a muffled noise is produced, the colours may change and
the picture may wobble. These effects are normal. There is no malfunction.
Caution!
Please wait approximately 20 minutes before executing the function again. Do
not press the button for a longer time in order not to reduce the service life of
the Degauss circuit.