Password setup, Setting up passwords & user permissions, Initial setup – First Alert H.264 Digital DVR PRO-D1610 User Manual

Page 15: System operation

Advertising
background image

Page 15

Password Setup

Setting Up Passwords & User Permissions

When you first startup your DVR, you are automatically logged in as the ADMIN under Device ID: 000000. By default, passwords
are disabled on the system. You will not need a password to log in or access menus. You will not need a password to access your
system using the browser-based remote software.
The system employs two levels of user authorities connected to a Device ID. The levels are as follows:
1. ADMIN (administrator): Has full control of the system, and can change both administrator and user passwords and enable/

disable password checking

2. USER (normal user): Only has access to live viewing, search, playback, and other limited authorities.
For security reasons, it is highly recommended to enable passwords on your system. If you enable passwords, you must select a
1-8 digit ADMIN password and a 1-8 digit USER password. The ADMIN and USER passwords must not be the same. If you
forget your password, contact First Alert Consumer Affairs for help in resetting.

To customize PASSWORD settings, click SYSTEM from the Main Menu, then click
PASSWORD. You are now in the User Setup menu. From here you can change the
DEVICE ID if desired. Note this is not a required for a basic setup:
1. Device ID: Click the field beside Device ID and enter a 6-digit numerical De-

vice ID using the Virtual Keyboard.

Next, in the USER SETUP Menu click CONFIG to set up users. NOTE: Only the
Administrator can enter the CONFIG setup. You can change the

STATE: active or not (Note for User Set #1, ADMIN, the STATE of ACTIVE or
INACTIVE cannot be changed.)

USER NAME: Assign or change user name using the virtual keyboard.

PASSWORD ENABLE: enable or disable the password for this user

PASSWORD: Password must be 1-8 digits

CONFIRM: confirm the password

PERMISSION: Select all permissions for this user. (NOTE: this option is not
available for ADMIN as they have all permissions). Available choices are:
Standby, Record Setup, HDD Manage, Language Setup, Time Setup, Start/
Stop Record, Display Setup, Alarm Setup, System Info, Motion Detect, Mobile
Setup, System Setup, PTZ Setup, Network Setup, Video/Audio Set, IE Preview
(Internet Explorer) for each of 16 Channels, Playback for each of 16 Channels.
Navigate the PERMISSION Screens by:

NEXT: Moves to next selecting page.

ALL: Selects all permissions.

CLEAN: Clears all permissions.
NOTE: This page is available for the administrator. The administrator can
assign permissions for the user. The user can view but can not change
their permissions.

Multi User Login
After Users are set up, Select active user from USER NAME drop down box to log on with pre-
viously set up permissions. The active user(s) will be available. Next, key in the device ID and
user password.

User Setup

User Password Setup

User Permission Screen 1

User Permission Screen 2

User Login-Multi Users

initial setup

system operation

Advertising