First Alert H.264 Digital DVR PRO-D1610 - Manual (Page 8)

Page 8
product overview
dvr controls
Item Function Control Description
1 Standby Press to enter/exit standby mode
2 IR Sensor IR receiver for the remote control
3 MENU/EXIT Press to open/close the main menu
4 LED Indicators Shows status of Link, 100M, Full, Alarm, Record, HDD.
5 Channel Numbers
Press buttons 1~9 to view the selected channel in full-screen. To display 2-digit channels
press both buttons slowly. Pressing 0 returns screen to 16 camera display mode.
6
During playback,
press the following:
Increase reverse playback speed 2X, 4X, 8X
Press to freeze playback to one frame, then press again to advance frame-by-frame
Press to start playback
Press to slow playback speed by 1/2, 1/4, 1/8
Press to increase forward playback speed 2X, 4X, 8X
7
Navigation/OK/PTZ
(Select direction
arrow, then press OK
to start PTZ motion)
In menus, press to confirm selections; in PTZ mode, press to change the navigation but-
tons to control the connected PTZ camera (not included)
Press to move cursor up; in PTZ mode, press to pan camera up
Press to move cursor down; in PTZ mode, press to pan camera down
Press to move cursor left; in PTZ mode, press to pan camera left
Press to move cursor right; in PTZ mode, press to pan camera right
8 USB
Connect a USB flash drive to the left port for data backup and firmware upgrades. Con-
nect a USB mouse to the right port
Front Panel
2
1 7
6
5
4 3
8