FUJITSU MB15F74UL - Manual (Page 24)

MB15F74UL
24
■ USAGE PRECAUTIONS
(1) V
CCRF
, Vp
RF
, V
CCIF
and Vp
IF
must be equal voltage.
Even if either RF-PLL or IF-PLL is not used, power must be supplied to V
CCRF
, Vp
RF
, V
CCIF
and Vp
IF
to keep
them equal. It is recommended that the non-use PLL is controlled by power saving function.
(2) To protect against damage by electrostatic discharge, note the following handling precautions :
•
Store and transport devices in conductive containers.
•
Use properly grounded workstations, tools, and equipment.
•
Turn off power before inserting or removing this device into or from a socket.
•
Protect leads with conductive sheet, when transporting a board mounted device
■ ORDERING INFORMATION
Part number Package Remarks
MB15F74ULPVA
20-pad plastic BCC
(LCC-20P-M05)