Ferrari stereo User Manual
Page 14
14
Radio Operation
Traffic Program (TP)
The traffic program system offers the advantage that current traffic news can
be received and heard despite the fact that Tape or CD/MDC are selected. For
this purpose, it is essential that a traffic program station is selected in the FM
waveband and that the traffic program is activated.
Traffic program station - display / select
If a traffic program station is selected, the abbreviation T appears.
Press the
button and a station search will begin to locate the next station
broadcasting the TP identifier.
The station can also be selected by station search or by direct frequency entry.
Announcement standby - switch on/off
If the selected traffic program station should interrupt the tape, CD/MDC
operation for traffic announcements, the
button must be pressed until the
abbreviation TP is displayed.
If traffic announcements are not desired, the
button must be pressed until
the abbreviation T appears.
Note :
During the traffic announcement, the desired increase in volume
can be set via the volume button. An announcement which is
currently being heard can be terminated by pressing the
button.
The unit then immediately switches back to the previously selected
operating mode. However, the next traffic announcement is
connected through again.
USEnglisch.bk : RUNDFUNK.fm Seite 14 Freitag, Februar 1, 2002 10:33 AM