Fisher PDG-DWT50L - Manual (Page 126)

8. Specifications
117
Screen Trigger
When the projector is powered ON the screen trigger output sends a low voltage trigger to the screen controller and the
screen will go down. When the projector is powered OFF the screen trigger stops sending a low voltage trigger to the
screen controller and the screen will go up.
Note:
To use this feature, you must turn on the Screen Trigger function. See Screen Trigger on page
85 for more
information.
Note:
Screen controllers are supplied and supported by screen manufacturers.
Note:
Do not use this jack for anything other than intended use. Connecting the wired remote control to the
SCREEN TRIGGER Mini Jack causes damage to the remote control.