Installation and connections, 1) setting up the screen and the projector, Etting – Fisher PDG-DWT50L User Manual
Page 26: P the, Creen and the, Rojector, Setting up the screen and the projector
Advertising
17
2. Installation and Connections
Setting Up the Screen and the Projector
This section briefly describes how to set up your projector and how to connect video and
audio sources.
Your projector is simple to set up and use. But before you get started, you must first:
• Set up a screen and the projector.
• Connect your computer or video equipment to the projector. See Making Connections on page
• Connect the supplied power cable. See Connecting the Supplied Power Cable on page
Note:
Ensure that the power cable and any other cables are disconnected before moving the projector. When
moving the projector or when it is not in use, cover the lens with the lens cap.
Advertising
This manual is related to the following products: