Fisher PDG-DWT50L - Manual (Page 57)

4. Convenient Features
48
Adjusting Position/Total Dots/Fine Sync
The Position/Total dots/Fine sync and Keystone Correction can be adjusted manually from the projector's control panel or
from the remote control unit. Refer to the following guides to adjust the Keystone Distortion manually.
Adjusting Position/Total Dots/Fine Sync by using the OSD Control Panel
1.
Press the Menu button to display the Main
menu. Select the Adjust menu using ▲or▼
and press Select to display the
Adjust menu.
2.
From the Adjust menu, press ◄or► to select
Image Options and scroll using ▲or▼ to
Horizontal, Vertical, Total dots, or Fine
sync.
3.
Adjust the Horizontal, Vertical, Total dots,
or Fine sync sliding bars using the select
▲▼◄► buttons.
4.
Press Cancel to return to the projected image.