FUJITSU Primergy RX200 S2 - Manual (Page 231)

231
PRIMERGY RX200 S2 User’s Guide
8
Hardwa
re C
onfigu
rat
ion/Utilitie
s
Baud Rate • 300
• 1200
• 2400
• 9600 (at the time of
purchase)
• 19.2K
• 38.4K
• 57.6K
• 115.2K
Sets the baud rate for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Protocol • VT100
• VT100, 8 bits
• PC-ANSI, 7 bits
• PC-ANSI
• VT100+ (at the time of
purchase)
• VT-UTF8
Sets the console type for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Flow Control • None (at the time of
purchase)
• XON/XOFF
• CTS/RTS
Sets the flow control.
This item appears when [Console Redirection Port]
is set to [Enabled].
Mode • Standard
• Enhanced (at the time of
purchase)
Sets the range of use for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
table: Items on the Console Redirection Submenu
Item Setting Description